Cradlepoint COR IBR600 Manuel

Naviguer en ligne ou télécharger Manuel pour Mise en réseau Cradlepoint COR IBR600. Cradlepoint COR IBR600 Product manual [en] [pl] Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
COR IBR600 ( Integrated Broadband Router )
QUICK START GUIDE
1 )
What’s In The Box
SETTING UP THE ROUTER
Purchase a data plan. Then insert the SIM if model requires.
Plug the power supply into an electrical outlet.
Connect WiFi (2.4) and modem ( , , ) antennas (finger tight only).
Purchase and connect active GPS antenna for -PWD models (SMA adapter included).
Connect the power supply to the IBR600.
Ensure power is switched on. o = OFF | = ON
2 )
3 )
FINDING YOUR PASSWORD
SPECIAL FEATURES
2 3 4
for more information about your product, visit:
www.cradlepoint.com
www.cradlepoint.com/IBR600
To learn more about features, visit:
Your unique default password is shown on the
product label on the bottom of your router. It is
also the last eight characters of the MAC
Address.
You will be asked for this password when you
log into the administration pages. The default
password provides security for your router
out-of-the-box.
Default SSID: IBR600-xxx (last 3 characters of
the MAC Address)
find this label on the bottom of your router
IPSec VPN End-Point Support
GRE Tunneling
Data Usage Management & Alerts
GPIO Interface
GPS (if supported by modem carrier)
Failover / Failback
WiFi Hotspot Services
(Captive Portal/Walled Garden)
IP Passthrough
WiFi as WAN & Dual SSIDs
VLAN Support
WiPipe
TM
Central Remote Management
USB to Serial Console Passthrough Support
LAN/WAN Affinity
USING THE FIRST TIME SETUP WIZARD
AC Power Supply Quick Start Guide
PORTS & SWITCHES
Integrated Broadband Router
With Modem & WiFi Antennas
ETHERNET
DATA SOURCE
( WAN )
default
ETH ERN ET CONNECT ION S
POWER
12VDC
RESET
WiFi ANTENNA
CONNECTOR (RSMA)
or
ACTIVE GPS
CONNECTOR (SMA
with included adapter)
FOR -PWD MODELS
WiFi ANTENNA
CONNECTOR
(RSMA)
MICRO
USB
WiFi ANTENNAS
(2.4)
Finger Tight Only
MODEM ANTENNAS
( , , )
Finger Tight Only
The First Time Setup Wizard will help you customize the name of your wireless network, change passwords
to something you choose, configure WAN failure check, and establish an optimal WiFi security mode. The IBR600
comes with a unique password creating built-in WiFi Security, which prevents unauthorized users from connecting to
your WiFi network.
1)
Open a browser window and type “cp/” or “192.168.0.1” in the address bar. Press ENTER/RETURN.
2)
When prompted for your password, type the eight character Default Password found on product label
(the last eight characters of the MAC Address).
3) When you log in for the first time, you will be automatically directed to the FIRST TIME SETUP WIZARD.
4) Follow the steps to establish a customized wireless network name, password, and security level.
If you are currently using the IBR600 WiFi network, you will need to reconnect your devices to the network
using the newly established wireless network name and wireless security password.
COMPUTERS
or LOCAL DEVICES
( LAN )
default
dual-stream n
Mounting Bracket
ACTIVATE YOUR MODEM
A wireless broadband data plan must be added to your IBR600. Wireless broadband data plans are
available from wireless carriers such as Sprint, Verizon, AT&T, and Clearwire. Mobile broadband, M2M,
and Router pricing plans are available. To add or transfer a line of service you will need to provide a
unique identifier such as ESN for 3G EVDO modems or IMEI/MEID for LTE or HSPA+ modems. LTE and
HSPA+ plans require a SIM. SIM provisioning for LTE and HSPA+ models is done the same way as for
USB modems. Once provisioned insert the SIM into the router until it clicks into place, close the SIM
door, and turn on the power switch. After adding a data plan to the Verizon 3G EVDO model the modem
may need to be activated. Log in to the IBR600 administration pages (see below) and select Internet
from the top navigation bar and then Connection Manager from the dropdown menu. Find and select
the CradlePointEVDO Modem” and click Control and then click Activate. When modem activation is
complete, confirm the modem LED is solid green on the router.
For more information on activation see www.cradlepoint.com/activation.
POWER
ON/OFF
POWER
LED
WiFI
LED
MODEM
LED
SIGNAL
STRENGTH
LEDS
AUXILIARY MODEM
ANTENNA
CONNECTOR
(SMA)
MAIN MODEM
ANTENNA
CONNECTOR
(SMA)
SIM SLOT
(SIM-BASED VERSIONS ONLY)
4 )
See Product Manual for suggested antenna positions.
ACTIVE GPS
The
IBR600LE-PWD
and
IBR600LP-PWD
now
come with an active GPS connection (SMA with
included adapter) at 3.3 V and 100 mA max.
For full functionality you will need to purchase a
powered GPS antenna separately. The
IBR600LE-PWD and IBR600LP-PWD include
only one WiFi antenna for operation in 1x1 WiFi
mode.
Vue de la page 0
1 2

Résumé du contenu

Page 1 - ACTIVATE YOUR MODEM

COR IBR600 ( Integrated Broadband Router )QUICK START GUIDE1 )What’s In The BoxSETTING UP THE ROUTER Purchase a data plan. Then insert the SIM if mode

Page 2 - FIRMWARE UPDATES

6 7 85This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

Commentaires sur ces manuels

Pas de commentaire